Uku.BS-4G- umarnin amfani:
1. Kayan aiki ya kamata a sanya a kan wani m ƙasa, da muhalli ya kamata tsabtace da kuma bushewa iska.
2. Kafin amfani da kayan aiki, kowane sarrafawa sauya ya kamata ya kasance a cikin wani non-aiki yanayin, da saurin daidaitawa knobs ya kamata a sanya a zui kananan matsayi.
3. Shigar da kwalban gwaji na al'ada, don daidaita aikin kayan aiki a lokacin oscillation, kauce wa samar da babban rawar jiki, ya kamata a cika duk kwalban gwaji lokacin shigarwa, kowane kwalban ruwa na al'ada ya kamata ya kasance kusan daidai. Idan adadin ruwa na al'ada ba shi da isa, za a iya sanya kwalban gwaji symmetrically.
4. Haɗa waje wutar lantarki, sanya wutar lantarki sauya a matsayin "bude", nuna haske.
5. Zaɓi noma zafin jiki: Duba umarnin amfani.
6. Open "oscillating sauya", nuna haske, a hankali daidaita gudun knob, hawa zuwa da ake so juyawa gudun.
Matsakaicin gudun amfani a cikin gudun daidaitawa kewayon, zai iya tsawaita aikin rayuwa na kayan aiki.
7. Kafin kowane kashewa, kowane sarrafawa sauya ya kamata ya kasance a non-aiki yanayin, yanke wutar lantarki.
8. Lura:
A: biyu sets na oscillators akwati, da oscillators sarrafawa da su "oscillation sauya" da kuma "saurin daidaitawa knob" aiki bi da bi.
B: Ba ya dace da abubuwa da ke dauke da masu narkewar sinadarai masu sauƙi, ƙananan ƙididdigar gas mai fashewa da ƙananan gas mai ƙonewa da kuma abubuwan guba.

4.BS-4G- Kulawa:
1. Daidai amfani da kuma kula da kayan aiki kulawa, sa shi a cikin kyakkyawan aiki yanayi, zai iya tsawaita aiki rayuwa na kayan aiki.
2. Bayan da sanyaya tsarin dakatar da aiki, tsabtace aiki rumbun da gilashi duba taga da m sanda.
Kayan aiki a lokacin ci gaba da aiki, kowane watanni uku ya kamata a yi a kai a kai dubawa; Bincika ko akwai ruwa drops, datti, da dai sauransu fadi a kan mota da kuma bayyana sanyaya sassa; tsaftace ƙura da datti a kan kwamfuta, condenser; Bincika fuses, sarrafa abubuwa da kuma fastening dunguluka.
3. Bearings na oscillator motsi sashi kafin masana'antar da aka cika da adadin lubricant (No. 1 calcium-sodium tushe), kayan aiki a lokacin ci gaba da aiki, ya kamata a kara lubricant sau daya a kowace watanni shida, cika adadin ya kai kimanin 1/3 na bearing sarari.
4. Kayan aiki bayan dogon lokaci amfani, halitta lalacewa ne al'ada. Kayan aiki bayan amfani da shekara guda, idan aka gano mota, kwamfuta da m amo, sanyaya, dumama tsarin bayyana m drive inji bearing lalacewa, lantarki sarrafawa sassa kashe .... A matsayin lalacewa, kamfanin zai ci gaba da samar da ingancin sabis don taimakawa wajen sarrafawa.